Features:
PA6-GF is a glass fiber reinforced nylon 6 material. The added glass is expected to significantly improve the overall stiffness, strength, heat resistance and interlayer adhesion of the material.
After mixing a certain proportion of glass fiber, its strength, toughness and stiffness are better than most 3D printing materials. Not only improves the mechanical properties of the printed part in the XY direction, but also significantly improves the strength in the Z-axis direction.

specification:
Wire diameter: 1.75mm or 2.85mm
Accuracy: ±0.05mm
Net weight: 2kg
Colour: Black

Printing conditions:
Nozzle temperature: 280-300°C
Platform temperature: 25-50°C
Cooling fan: off
Printing speed: 60mm/s
Printing environment temperature: 25-50°C

Precaution:
Whether it is stored or used, the material should be placed in a dry environment
With wear-resistant nozzles, the added short fibers will wear the copper nozzles in about 9 hours of use. Therefore, we recommend using wear-resistant nozzles to print this material, such as hardened steel or ruby nozzles
Annealing treatment, it is recommended to put the model in an oven at 80-100°C for 1-3 hours annealing treatment after printing to enhance its mechanical properties.